 |
 |
|
||||
|
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
The actual sizes are in metric, and imperial sizes are approximate.
| Cutter size D | Part No. | Max. drilling depth (mm) |
Center drill (Part No.) |
|||
| mm | inch | (Straight shank sets) | (SDS shank sets) | |||
 |
25 | 1" | PCGW25 | PCGW25R | 130 mm (5-1/8") (Cutter length 150 mm (5-7/8")) |
PCGWCD225 |
 |
29 | 1-1/8" | PCGW29 | PCGW29R | ||
 |
32 | 1-1/4" | PCGW32 | PCGW32R | ||
|
35 | 1-3/8" | PCGW35 | PCGW35R | ||
|
38 | 1-1/2" | PCGW38 | PCGW38R | ||
|
45 | 1-3/4" | PCGW45 | PCGW45R | ||
|
50 | 2" | PCGW50 | PCGW50R | 130 mm (5-1/8") (Cutter length 157 mm (6-11/64")) |
|
|
55 | 2-1/8" | PCGW55 | PCGW55R | ||
|
60 | 2-3/8" | PCGW60 | PCGW60R | ||
|
65 | 2-9/16" | PCGW65 | PCGW65R | ||
|
70 | 2-3/4" | PCGW70 | PCGW70R | ||
|
75 | 2-7/8" | PCGW75 | PCGW75R | ||
|
80 | 3-1/8" | PCGW80 | PCGW80R | ||
| 85 | 3-3/8" | PCGW85 | PCGW85R | |||
| 90 | 3-1/2" | PCGW90 | PCGW90R | |||
| 95 | 3-3/4" | PCGW95 | PCGW95R | |||
|
100 | 3-7/8" | PCGW100 | PCGW100R | ||
| 105 | 4-1/8" | PCGW105 | PCGW105R | |||
|
110 | 4-1/4" | PCGW110 | PCGW110R | ||
| 115 | 4-1/2" | PCGW115 | PCGW115R | |||
|
120 | 4-3/4" | PCGW120 | PCGW120R | ||
| 125 | 4-15/16" | PCGW125 | PCGW125R | |||
| 130 | 5-1/8" | PCGW130 | PCGW130R | |||
| 140 | 5-1/2" | PCGW140 | PCGW140R | |||
| 150 | 5-7/8"? | PCGW150 | PCGW150R | |||
| 155 | 6" | PCGW155 | PCGW155R | |||
|
160 | 6-5/16" | PCGW160 | PCGW160R | ||
| 165 | 6-1/2" | PCGW165 | PCGW165R | |||
| 170 | 6-11/16" | PCGW170 | PCGW170R | |||
| 180 | 7" | PCGW180 | PCGW180R | |||
| 200 | 7-7/8" | PCGW200 | PCGW200R | |||
| 210 | 8-1/4" | PCGW210 | PCGW210R | |||
| 220 | 8-11/16" | PCGW220 | PCGW220R | |||
| Cutter size D | Part No. | Max. drilling depth (mm) |
||
| mm | Inch | |||
|
25 | 1" | PCGW25C | 130 mm (5-1/8") (Cutter length 150 mm (5-7/8")) |
|
29 | 1-1/8" | PCGW29C | |
|
32 | 1-1/4" | PCGW32C | |
|
35 | 1-3/8" | PCGW35C | |
|
38 | 1-1/2" | PCGW38C | |
|
45 | 1-3/4" | PCGW45C | |
|
50 | 2" | PCGW50C | 130 mm (5-1/8") (Cutter length 157 mm (6-11/64")) |
|
55 | 2-1/8" | PCGW55C | |
|
60 | 2-3/8" | PCGW60C | |
|
65 | 2-9/16" | PCGW65C | |
|
70 | 2-3/4" | PCGW70C | |
|
75 | 2-7/8" | PCGW75C | |
|
80 | 3-1/8" | PCGW80C | |
| 85 | 3-3/8" | PCGW85C | ||
| 90 | 3-1/2" | PCGW90C | ||
| 95 | 3-3/4" | PCGW95C | ||
|
100 | 3-7/8" | PCGW100C | |
| 105 | 4-1/8" | PCGW105C | ||
|
110 | 4-1/4" | PCGW110C | |
| 115 | 4-1/2" | PCGW115C | ||
|
120 | 4-3/4" | PCGW120C | |
| 125 | 4-15/16" | PCGW125C | ||
| 130 | 5-1/8" | PCGW130C | ||
| 140 | 5-1/2" | PCGW140C | ||
| 150 | 5-7/8"? | PCGW150C | ||
| 155 | 6" | PCGW155C | ||
|
160 | 6-5/16" | PCGW160C | |
| 165 | 6-1/2" | PCGW165C | ||
| 170 | 6-11/16" | PCGW170C | ||
| 180 | 7" | PCGW180C | ||
| 200 | 7-7/8" | PCGW200C | ||
| 210 | 8-1/4" | PCGW210C | ||
| 220 | 8-11/16" | PCGW220C | ||
| *note | 250 | 9-7/8" | PCGW250C | 130 mm (5-1/8") (Cutter length 165 mm (6-1/2")) |
| *note | 260 | 10-1/4" | PCGW260C | |
| *note | 300 | 11-13/16" | PCGW300C | |
| *note | 310 | 12-1/4" | PCGW310C | |
| * Note: | Use 250mm and above cutters with PCSKXR or PCSKXMXK(not use L shank). |
- The complete sets come standard with a high speed steel center drill (PCGWCD225) and the guide bar for Galvawood core bit (PCGWGB).
- If you buy the cutter only, you will also need to buy the center drill for Galvawood core bit (which comes with the guide bar for Galvawood core bit) separately.
| Item | Part No. | Applications |
| HSS center drill (containing the guide bar also) |
PCGWCD225 | Metal siding, wood material. (Complete set contains HSS center drill and guide bar.) |
| Carbide tipped center drill | PCHWCD225 | Used for drilling in ceramic siding boards, ALC. |
| Acute Center Drill | PCBHCD225 | Wood, metal siding, ceramic siding |
| Guide bar | PCGWGB | Drilling guide after making a pilot hole by HSS center drill. (Complete set always contains HSS center drill and guide bar.) |
| Click here for the size table of the Poly-Clic shanks. |
Pre-drill using HSS center drill and use the guide bar as a guide for drilling in metal siding.
1) Drill pilot hole on the center of drilling target using HSS center drill.
2) Remove HSS center drill from Poly-Clic shank.
3) Attach the cutter to shank. Fix the guide plate on the guide bar and set to shank.
4)While slowly rotating the drill, apply pressure gently until the cutter is stable.
5) Pull out cutter while it is rotating.
|
Copyright © 2005-2016 MIYANAGACo., Ltd. All rights reserved. For customers in US and Canada, please visit www.miyanagaamerica.com. |