|
 |
|
||||
|
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
For small-diameter drilling, the diamond drill bit with low vibration and low noise has made its debut.
Comparing the amount of dust after drilling into cracked surface
Comparison of residual dust around the crack
The breakaway of surface is minimized on the backside due to drilling in rotary mode, thus resulting in excellent resin injection.
Drills in concrete, ceramic tiles, porcelain tiles and stone in rotation mode.
* No dust clogs at the cracks.
Minimum amount of dust on the back side.
| Bit size D (mm) | Rotation speed (rpm) | Power consumption (W) |
| 4.0 to 10.5 (5/32" to 13/32") | 15000 to 3000 | 250W or larger |
| 11.0 to 24.0 (27/64" to 15/16") | 7000 to 1500 | 500W or larger |
Low noise achieved through rotary mode drilling, making it possible to work anytime, anywhere.
Smoothly drills in the materials such as hard ceramic tiles and stone, for which the use of conventional drill bits for concrete or ceramic tiles causes the blade edge to burn or be chipped.
The amount of water flow is finely adjustable using the Water control valve attached onto the shank.
By automatic valve mechanism, water is fed to the cutting teeth only while drilling.
The body and shank can easily be changed with a single action.
All you need to do is to replace the cutter portion as long as you use these tools of the same size. Therefore, the Mist diamond drill is available at only two to three times the price of a conventional drill bit for concrete or ceramic tiles.
|
Copyright (C) 2005 - 2010 MIYANAGA Co., Ltd. All rights reserved. |